* Making certain that your new hard disk is detected properly and your computer is set to boot from a CD, boot your computer from the Zipper CD. Hit ENTER at all of the PTVupgrade boot CD prompts until you are presented with a bash prompt. * Mount...
See more 
* Making certain that your new hard disk is detected properly and your computer is set to boot from a CD, boot your computer from the Zipper CD. Hit ENTER at all of the PTVupgrade boot CD prompts until you are presented with a bash prompt. * Mount your CD by entering mount /dev/hdX /cdrom, X being the location of your CD-ROM (primary master: a, primary slave: b, secondary master: c, secondary slave: d). * Run the main script with sh /cdrom/zipper.sh (hit ENTER). The Zipper will ask for the first three digits of your TiVo service number, which can be found on the back of your TiVo. * Enter the appropriate location for your TiVo hard disk (hda, hdb, etc.) The script will now begin the installation of the InstantCake image you provided (this may take a while). * Enter a static IP address for your TiVo and the IP address of your router (or gateway). * Power off the computer, and remove the TiVo hard disk. See less 
.value, '<a href="http://www.kaboodle.com/adoram/tivo.html"><img alt="" src="http://cn1.kaboodle.com/hi/img/2/0/0/50/9/AAAAApu15CUAAAAAAFCcKw.jpg" width="80px" /></a>','http://www.kaboodle.com/adoram/tivo.html','1');)
