Added on 11/15/09

Woodcraft offers over 15,000 woodworking tools, woodworking plans, woodworking supplies for the passionate woodworker.

Woodcraft offers over 15,000 woodworking tools, woodworking plans, woodworking supplies for the passionate woodworker. See less

Highlights: Price: $76.99

Added on 11/08/09

Constructed as 2 tools in 1, this 120 V edge belt sander and spindle sander operates with oscillating and rotary motion allowing for fast, burn-free finishes on edges, faces, contours and inside or outside curves. Tool-free conversion from belt to... See more

Constructed as 2 tools in 1, this 120 V edge belt sander and spindle sander operates with oscillating and rotary motion allowing for fast, burn-free finishes on edges, faces, contours and inside or outside curves. Tool-free conversion from belt to spindle makes changes quick and easy, so you can get multiple jobs completed efficiently. This unit also comes with on-board accessory storage to neatly hold the belt mechanism, all drums, throat plates and washers to help keep your workspace tidy. * 60 opm for fast, efficient sanding action * 5 amp motor with 3/8 hp supplies power for high performance and excellent results * Built-in sawdust collection port helps keep your workspace and air clean * Ball-bearing construction for smooth operation and long life * MFG Brand Name : RIDGID * MFG Model # : EB4424 * MFG Part # : EB4424 See less

Highlights: $199.99

Added on 11/25/08

Work Sharp 3000 with Free Leather Hone

Work Sharp 3000 with Free Leather Hone See less

Highlights: $199.99

Added on 08/31/09

Our low-angle block plane stands apart from all others. Its 12° bed angle and low cutting angle of 37° excel at working end grain. It has higher side wings ideal for shooting, finger grips in each side for better control, and a combined blade advance... See more

Our low-angle block plane stands apart from all others. Its 12° bed angle and low cutting angle of 37° excel at working end grain. It has higher side wings ideal for shooting, finger grips in each side for better control, and a combined blade advance and lateral adjust that is the most sensitive and accurate available. Two blade guide screws prevent blade shifting. Its compact 6-3/8" long by 2" wide ductile cast iron body can take hard knocks, and the adjustable nosepiece does not extend past the body, avoiding unwanted blade shifts if the plane is dropped. Machining is done to exacting standards in our factory; the milled sides and sole are surface ground to a fine finish. Weighs 1-3/4 lb and includes a lapped, 1/8" thick by 1-5/8" wide, 25° blade, in either A2 or O1 tool steel. We offer various accessories to maximize its use. For working difficult wood, 38° and 50° bevel blades are available in A2 or O1 tool steel. Our A2 toothed blade (38° bevel) works the most difficult grain,... See less

Highlights: Veritas® Low-Angle Block Plane, A2 $139.00

Added on 11/08/09

Bring digital precision, and the convenience of remote readout, to your router lift, router table, shaper, and other shop tools, plus get the added benefit of dead-on repeatability of settings, with Wixey’s Remote Digital Readout Kit. The readout has... See more

Bring digital precision, and the convenience of remote readout, to your router lift, router table, shaper, and other shop tools, plus get the added benefit of dead-on repeatability of settings, with Wixey’s Remote Digital Readout Kit. The readout has a measuring length of 4.9 inches (125mm ) and reads to a fine resolution in 3 modes: Decimal inches to .001 inches, Fractional inches to 1/32 in., and Metric to .05 mm. Unit has an accuracy of +/- .001 inches in decimals, +/- 1/500 inches in fractions, and +/- .05mm in metric. Functions include IN /MM readout modes, an On/Off switch, Zeroing capabilities, and an Auto Shut-Off. The remote display is connected with a 3 ft. cord that can be disconnected for easy installation and access. Set-up requires drilling 2 small holes in your machine using the drill bit supplied, and mounting hardware is included. Readout fits router lifts made by Woodpeckers, Jessem, Jointech, and others. Unit uses a Type CR2032 battery (included). Imported See less

Highlights: $58.92

Added on 11/08/09

I am a Shop teacher and have a shop system at school but at home in my well tooled shop the dust collection is last priority unfortunately. This unit works well if you have the space to have this and a shop vac next to each other. Only a little of... See more

I am a Shop teacher and have a shop system at school but at home in my well tooled shop the dust collection is last priority unfortunately. This unit works well if you have the space to have this and a shop vac next to each other. Only a little of the fine dust gets past the cyclone. I have used it for sanding many projects and I have even used it to vac the floor with metal bits and hardware and it works fine. Just buy the DIY system, two 5 gal pals are not worth the extra. See less

Highlights: Price: $99.99

Added on 10/21/09

This new patent pending router lift features an innovative time saving mechanism allowing for super-rapid adjustment for setting the elevation of your router for quick bit changes. This unique system is combined with a 32 pitch lift screw giving you... See more

This new patent pending router lift features an innovative time saving mechanism allowing for super-rapid adjustment for setting the elevation of your router for quick bit changes. This unique system is combined with a 32 pitch lift screw giving you the finest height adjustment possible. With barely a ¼ turn of the lift wrench, the router is free to be moved to any vertical location without a single turn of the crank handle. When fine adjustments are needed, the precision lift screw and matching engraved scale brings .001" adjustability to your finger tips. This combination of rapid elevation change and micro-fine adjustability will save you time and increase the accuracy of all your router table operations. The QL350A and QL350A-912 feature eight fine thread level screws and two adjustable side plungers for a perfect fit in your table. The carriage and motor clamp are accurately machined from solid aircraft grade aluminum. The top plate is cast and ground aluminum “jig” plate offering... See less

Highlights: $199.95

Added on 12/07/09

Protect your cast iron and steel tool tables from spills and corrosion with Tool Clad Magnetic Tool Covers. These thick plastic covers adhere magnetically to seal out humidity and spills and are thick enough to cushion the surfaces from dings and... See more

Protect your cast iron and steel tool tables from spills and corrosion with Tool Clad Magnetic Tool Covers. These thick plastic covers adhere magnetically to seal out humidity and spills and are thick enough to cushion the surfaces from dings and dents from dropped tools. The Table Saw Cover is imprinted with a deluxe protractor guide, drill table, geometric formula chart, wood hardness chart and other useful information plus there's plenty of space to make notes with a dry erase marker. The Band Saw Cover includes a blade guide, blade length calculations, TPI usage guide and minimum blade radius. The Scroll Saw / Drill Press Cover has a 1" grid and concentric circles every 1/2". USA See less

Highlights: Table Saw Cover 28" X 44" SALE $39.99

Added on 08/21/09

From the Manufacturer Mirka's Grip faced Abranet Vacuum Block allows you to hand sand wood, paint and drywall while collecting the sanding dust with a vacuum. Eliminates the dirt and dust when doing interior paint and dyrwall sanding.

From the Manufacturer Mirka's Grip faced Abranet Vacuum Block allows you to hand sand wood, paint and drywall while collecting the sanding dust with a vacuum. Eliminates the dirt and dust when doing interior paint and dyrwall sanding. See less

Highlights: $16.99

Added on 12/11/09

When we purchased an unusual double-ended marking gauge for our antique tool collection, we immediately saw an opportunity to reinterpret this useful and elegant design. Since it retains two separate measurements at once (up to 3-1/4" combined), you... See more

When we purchased an unusual double-ended marking gauge for our antique tool collection, we immediately saw an opportunity to reinterpret this useful and elegant design. Since it retains two separate measurements at once (up to 3-1/4" combined), you can alternate between them as you work without having to reset the stops. It is particularly convenient for transferring and marking repetitive dimensions such as those needed for mortises and tenons. A thumbscrew with a brass shoe locks each of the 3/4" diameter heads in position. The single-sided bevel pulls the gauge against stock to maintain accuracy while marking – the cutting edge is at the very end of the rod (also useful for transferring depth measurements). The wheel cutters at each end slice rather than tear fibers, scribing cleanly at any point of their circumference, even on cross grain. The 4-1/2" marking gauge fits easily in an apron pocket, and the cutting wheels retract into the gauge faces for safe storage. Made of... See less

Added on 11/09/09

Stable four-wheel design. Foot-operated levers lift the machine for movement. Rubber leveling feet park the item for use. Increases the height of the item just 9/16 in. Catalog/Online Exclusive.

Stable four-wheel design. Foot-operated levers lift the machine for movement. Rubber leveling feet park the item for use. Increases the height of the item just 9/16 in. Catalog/Online Exclusive. See less

Highlights: $49.99

Added on 10/04/09

The Ridge Carbide TS2000 is an awesome saw blade for serious woodworkers. Although most saw blade manufacturers make similar claims, reality is clearly behind this top-shelf performer and winner of numerous product reviews. Ridge Carbide, located in... See more

The Ridge Carbide TS2000 is an awesome saw blade for serious woodworkers. Although most saw blade manufacturers make similar claims, reality is clearly behind this top-shelf performer and winner of numerous product reviews. Ridge Carbide, located in NJ, begins with a roller tensioned .087” thick steel body that is designed to remain harmonic free during the most demanding cutting situations. Because of the way this blade is made, no dampeners are required or needed to get performance that surpasses most other saw blades even when combined with a dampener. By not using a dampener, you don't sacrifice any cutting depth. The 40 teeth on this saw blade are ground from C4 micro grain carbide, and go through a four step shaping and sharpening process. This process finishes with a 1200 grit pass to create razor sharp edges. In spite of the higher cost, the TS2000 saw blade utilizes WH style carbide teeth which can be resharpened 20 – 25 times because of their increased thickness. Low cost... See less

Highlights: TS2000TK $89.00

Added on 11/09/09

These compact, lightweight Fence Clamps allow you to secure a huge variety of shop-made auxiliary fences to your existing fences without having the clamp interfere with your work. The clamp arm simply fits into a 3/8" hole in the top of the auxiliary... See more

These compact, lightweight Fence Clamps allow you to secure a huge variety of shop-made auxiliary fences to your existing fences without having the clamp interfere with your work. The clamp arm simply fits into a 3/8" hole in the top of the auxiliary fence, keeping it out of the way. That means no more clunky wood screws and C-clamps and no need to screw into your expensive fence! Works great for table saws, band saws, cutoff saws, router fences and more. Clamps can be used singly as stop blocks, or in pairs for sacrificial fences, half-fences, resaw fences, and a variety of other fixtures. One set of clamps will do it all! Includes 2 clamps. See less

Highlights: $17.99

Added on 10/11/09

"I would go so far as to say this book should be a required prerequisite for any woodworker who has any level of interest in workbenches. Whether your current bench is super fancy with all the bells and whistles, or simply a solid-core door on saw... See more

"I would go so far as to say this book should be a required prerequisite for any woodworker who has any level of interest in workbenches. Whether your current bench is super fancy with all the bells and whistles, or simply a solid-core door on saw horses, you will have some real food for thought after reading this book. I don’t expect everyone to experience the ground-shaking revelation I did, but you will certainly walk away with a better understanding of a workbench’s intended role in a wood shop, and more importantly, YOUR workbenches role in YOUR shop." — Marc Spagnuolo, The WoodWhisperer.com See less

Highlights: $34.00

Added on 09/10/09

Review First place winner, 2008 Golden Hammer Awards, National Association of Home and Workshop Writers (NAHW) "Right on the money . . . it's a shop manual you'll want to keep close at hand regardless of how seasoned a woodworker you become."... See more

Review First place winner, 2008 Golden Hammer Awards, National Association of Home and Workshop Writers (NAHW) "Right on the money . . . it's a shop manual you'll want to keep close at hand regardless of how seasoned a woodworker you become." —Canadian Woodworking Magazine E-Newsletter Product Description This essential guide to woodworking’s most versatile tool includes a thorough analysis on everything needed to know in order to purchase, setup, use, and maintain a band saw. This book details what woodworkers need to know before purchasing a saw—including the eight questions to ask before buying a used saw—along with topics such as a part-by-part overview of every component of the saw, techniques of set-up and alignment, choosing the right blade, and understanding hand positioning to provide any woodworker with the most complete guide to a band saw. Special sections are devoted to band saw accessories, how to deal with common problems, and how to maintain a band saw to keep it... See less

Highlights: $13.57

Added on 04/26/09

One size fits ALL! Can be sent anywhere Free catalog included Redeem online, at our retail stores, or over the phone FREE Standard Shipping Buy today - delivered today! Send to any valid email address Redeem online, at our retail stores, or over the... See more

One size fits ALL! Can be sent anywhere Free catalog included Redeem online, at our retail stores, or over the phone FREE Standard Shipping Buy today - delivered today! Send to any valid email address Redeem online, at our retail stores, or over the phone A GREAT last minute gift | To check your gift card balance, click here. For step-by-step instructions on redeeming gift cards, click here. For help on finding your gift card number and pin, click here. See less

Added on 11/25/08

A conventional gift card or e-gift card is always a welcome gift. Cards can be purchased in any amount of $10.00 or more, and can be redeemed online, by phone, by mail, and at our retail stores in Canada. Mail-order gift cards can be personalized by... See more

A conventional gift card or e-gift card is always a welcome gift. Cards can be purchased in any amount of $10.00 or more, and can be redeemed online, by phone, by mail, and at our retail stores in Canada. Mail-order gift cards can be personalized by adding your special message. See less

Added on 11/27/09

Use TriScribe to make a marking gauge, mortise gauge or panel gauge by adding one or both scribe points to your try-square or combination square. This will transform it into a very accurate and stable marking gauge or mortise gauge. Attach the scribe... See more

Use TriScribe to make a marking gauge, mortise gauge or panel gauge by adding one or both scribe points to your try-square or combination square. This will transform it into a very accurate and stable marking gauge or mortise gauge. Attach the scribe points to a longer blade try square/combination square to get great depth when marking panels, and achieve the same accuracy and ease that you mark mortises, tennons, rabbets, etc. * Attach trammel heads to any rule up to 3/32" thick and 2" wide, with a scribe point at one end and a pencil at the other, for the only flat-lying compass on the market * Designed to lie flat on your work piece, making it inherently stable, giving you precision and constant accuracy for arcs and circles * The diameter is only limited by length of rule * Sold as a pair with 2 scribe points California Residents: Click here for Proposition 65 information. See less

Highlights: $21.99

Added on 12/06/09

"The Wireless shutter release is handy for taking pictures of subjects that are difficult to approach, or to minimize vibration for close-ups and time exposure. It employs a superior anti-interference functionality and allows a choice of 16 different... See more

"The Wireless shutter release is handy for taking pictures of subjects that are difficult to approach, or to minimize vibration for close-ups and time exposure. It employs a superior anti-interference functionality and allows a choice of 16 different RF channels. This is particularly useful if several photographers are working in the same vicinity as you need only choose a specific channel for each photographer to prevent overlapping signals. Another use would be the ability to control multiple cameras with a single remote by assigning each camera their own receiver channel and switching the channels on transmitter. Compatible with EOS-3, 1v HS/1v, 1D-series, 1Ds-series, 5D-series, 10D, 20D, 30D, 40D, 50D, D30, D60 and D2000" See less

Highlights: Total Price: $40.83

Added on 09/09/09

We designed the WhiBal® White Balance Reference Card to be the best Gray Card for White balance available. WhiBal® technology is now Patent Pending and all WhiBals® are made in USA. What makes it so different? Having a "Gray Card" reference is the... See more

We designed the WhiBal® White Balance Reference Card to be the best Gray Card for White balance available. WhiBal® technology is now Patent Pending and all WhiBals® are made in USA. What makes it so different? Having a "Gray Card" reference is the best assurance that the digital pictures that you capture will have the ability to be properly White Balanced. Only with a proper White Balance can you be ensured of proper and accurate color, regardless of lighting conditions. Unlike your eyes, a digital camera does not automatically see whites as white. It sees the color of the light reflected from it, hence blue-ish in Daylight and Orange-ish in incandescent lighting. By photographing a Gray Card reference for each lighting situation that you are in, you are assured of being able to achieve a proper White Balance for all of your pictures. The Gray Card reference picture can be used with today's software to balance the color casts that various lighting conditions produce with all digital... See less

Highlights: $20.95

Added on 09/24/09

Whether you’re trying to identify loose screws or you just want to figure out which nuts and bolts to use where, the Thread Detective is the perfect tool. Available in standard or metric, it features clearly marked gauges for quick identification of... See more

Whether you’re trying to identify loose screws or you just want to figure out which nuts and bolts to use where, the Thread Detective is the perfect tool. Available in standard or metric, it features clearly marked gauges for quick identification of bolt size, nut diameter and thread pitch. Standard guages are black with 14 measuring gauges. Metric gauges are red with 11 measuring gauges. Includes heavy-wire lanyard and handy inch/mm ruler for measuring studs. See less

Highlights: $14.99

Added on 09/21/09

Although there are quite a few sanding blocks on the market, they are generally ho-hum; this is a very good one. The hardwood body fits naturally in the palm of your hand without the need for a death grip. The felt-covered steel sole is flat but... See more

Although there are quite a few sanding blocks on the market, they are generally ho-hum; this is a very good one. The hardwood body fits naturally in the palm of your hand without the need for a death grip. The felt-covered steel sole is flat but forgiving. Best of all, the four spring tips in the base automatically tension the sandpaper as you tighten the brass thumbscrew down. With a 3" x 4" base, it efficiently uses exactly 1/6 of a sheet of sandpaper. Weighs 14 oz. Designed and made in Canada. See less

Highlights: $29.90

Added on 06/21/09

The blade and stainless-steel handle-mounting bolt are completely over-molded, creating a solid one-piece blade/spine/mount assembly. A single brass fastener secures the bubinga handle, the shape of which has been derived from antique saws in the Lee... See more

The blade and stainless-steel handle-mounting bolt are completely over-molded, creating a solid one-piece blade/spine/mount assembly. A single brass fastener secures the bubinga handle, the shape of which has been derived from antique saws in the Lee Valley collection. The saw has excellent balance, cuts easily and true, and has a comfortable pistol grip that makes the saw feel as if it’s an extension of your arm. Measures 14-1/4" long overall. Patent pending. See less

Highlights: $65.00

Added on 07/18/09

MSC Industrial Supply is a distributor of industrial tools and MRO supplies with 450,000 products online ready for same day shipment, real time pricing, and inventory availability.

MSC Industrial Supply is a distributor of industrial tools and MRO supplies with 450,000 products online ready for same day shipment, real time pricing, and inventory availability. See less

Highlights: $33.02

Added on 08/09/09

Our BR-6 Pocket Rule and BR-12 Bench Rule are the finest and most useful rules available. These "zero-glare" triangular rules defy logic. The closer you get them to a light source the easier they are to read! Try reading a satin chromed rule held... See more

Our BR-6 Pocket Rule and BR-12 Bench Rule are the finest and most useful rules available. These "zero-glare" triangular rules defy logic. The closer you get them to a light source the easier they are to read! Try reading a satin chromed rule held next to a halogen light - it doesn't work at all. Each BR-6 and BR-12 comes with a solid brass hook that can easily be attached thereby transforming each rule into a hook rule that allows you to read dead accurate length measurements from the end of your stock without any hassles. It doesn't get any easier than this! The BR-6 and BR-12 are simply the finest rules you will ever have in your shop. See less

Highlights: $17.95

Added on 05/11/09

Use of the hook at the end of these rules facilitates measuring dimensions from the edge of a board. Each rule has four scales with 1/8, 1/16, 1/32, and 1/64 inch divisions. The length of the hook is adjustable. 3015025$24.00

Use of the hook at the end of these rules facilitates measuring dimensions from the edge of a board. Each rule has four scales with 1/8, 1/16, 1/32, and 1/64 inch divisions. The length of the hook is adjustable. 3015025$24.00 See less

Highlights: $24.00

Added on 10/05/08

#49 Second Cut, narrow pattern (rasp) half round and tapered. This is a high quality, woodworker, cabinetmaker's wood rasp. It has a narrow pattern and cut edges. Leaves a relatively smooth finish but is rougher than the #50. #50 Smooth, narrow... See more

#49 Second Cut, narrow pattern (rasp) half round and tapered. This is a high quality, woodworker, cabinetmaker's wood rasp. It has a narrow pattern and cut edges. Leaves a relatively smooth finish but is rougher than the #50. #50 Smooth, narrow pattern (rasp) half round and tapered. This is a high quality, woodworker, cabinetmaker's wood rasp. It has a narrow pattern and cut edges. Leaves a relatively smooth finish. Often used after #49. Both rasps are made by Nicholson. See less

Highlights: $32.54

Added on 07/18/09

Our jointer/edger can be used on cabinet scrapers, scraper plane blades, handsaws and ski edges. It has a 45° jointing capability as well as the standard 90°. The handle has a comfortable, ergonomic shape and the screws are designed so they can be... See more

Our jointer/edger can be used on cabinet scrapers, scraper plane blades, handsaws and ski edges. It has a 45° jointing capability as well as the standard 90°. The handle has a comfortable, ergonomic shape and the screws are designed so they can be tightened with a 25¢ piece (to accommodate skiers). In the shop, it is invaluable for jointing scrapers and handsaws; the fence is relieved next to the file to accommodate tooth set. Anodized aluminum with solid brass screws. Use with a 6" or 8" mill file (not included). See less

Highlights: $19.50

Added on 04/26/09

A versatile tool for fine work, particularly on narrow material or in confined areas, this small router plane is invaluable for any task requiring small recesses, grooves or dadoes. The sole is designed to completely encircle the blade when in the... See more

A versatile tool for fine work, particularly on narrow material or in confined areas, this small router plane is invaluable for any task requiring small recesses, grooves or dadoes. The sole is designed to completely encircle the blade when in the closed-throat position for maximum registration to the workpiece, even when approaching from the side or working the edge. This also allows it to bridge recesses, providing great stability even on narrow stock. The blade may be positioned inboard for standard closed-throat use, or outboard, with the cutting edge of the blade extending beyond the body, for true bullnose work. The blade-clamping knob has been positioned behind the blade to allow visibility and chip clearance. Pressure from a wave washer steadies the blade during height adjustments. The comfortable ductile cast iron body is accurately machined and features a lapped sole. The plane is 3-1/4" wide and 2-1/4" deep, with a 1/4" wide high-carbon steel blade. Weighs 7 oz. Patented.... See less

Highlights: $55.00

Added on 04/26/09

This spokeshave uses a basic traditional shape, not of the spokeshaves of the last century, but of the century before. Until about 1900, the vast majority of spokeshaves were low-angle spokeshaves with wooden bodies. The blades were hand forged with... See more

This spokeshave uses a basic traditional shape, not of the spokeshaves of the last century, but of the century before. Until about 1900, the vast majority of spokeshaves were low-angle spokeshaves with wooden bodies. The blades were hand forged with upturned tangs that fitted into holes pierced in the body of the shave. Wedged in position, they were adjusted by tapping the ends of the tangs or the base of the blade, as required. Although these spokeshaves cut beautifully because of their low cutting angle, they were not easy to adjust and became very expensive as hand processes gave way to automated manufacturing methods. This spokeshave has the same low cutting angle as spokeshaves of old (20° basic bevel with a 25° micro-bevel), but cutting depth has been simplified substantially. Instead of adjusting blade projection, the blade is fixed, forming the sole of the spokeshave. The toe piece is adjustable to control the depth of cut. Used in one orientation, the toe piece is suited to... See less

Highlights: $67.00