Shop for it:
(added from 1 site)
Description:
By Theresa Vinson Stenersen | Last issue, I talked about the cabling basics. This issue, Ill be attempting to delve a little deeper into some miscellaneous cable knowledge hints for reading charted cable symbols, making a...
See more »
By Theresa Vinson Stenersen | Last issue, I talked about the cabling basics. This issue, Ill be attempting to delve a little deeper into some miscellaneous cable knowledge hints for reading charted cable symbols, making a decorative mini-cable and correcting a mis-crossed cable a few rows down. Deciphering cable symbols: The symbols in charted cable patterns vary widely. In fact there seem to be nearly as many ways to chart a cable as there are cables to chart. Always, always check the symbol key for detailed instructions on how to work the cable in question. Thankfully it is not too terribly uncommon to have some variation that shows which direction the cable leans. For example, this is a symbol for a simple four stitch, front cross cable: You can see that the column in the middle of the symbol leans towards the left: Last issue we learned that to make a LEFT leaning cable, you hold the stitches in FRONT of the work. See how that works? The same is true for the right leaning, back cross cable: You can see how it resembles the cable it represents
which can make it a bit easier to read the charts at a glance. Of course, this depends on having firmly embedded in your brain that for right-leaning cables, you hold the stitches in the back, and for left-leaning cables you hold the stitches in the front. Perhaps you can think be RIGHT BACK and
well, both leFt and Front have the letter f in them. (Okay, that last one was lame.) Mini-cables These very cute, very simple mock cables are excellent borders to larger cables and are quite easy to do, once you learn their secrets. To start you will need to have two knitted stitches on a purl background, like this: Insert your right-hand (working) needle into the second stitch on the left-hand needle labeled STITCH #2 in the picture above:
and knit it first. Do not slip it off. Leave it in its position on the left hand needle. (I know this is weird. Press on.) Now insert the right hand (working) needle into STITCH #1: and knit it. Then slip the two worked stitches off the left hand needle at the same time. Do this every 4th row for a miniature cable that looks like this: You can also make three- and four-stitch mock cables. Simply knit the stitch farthest to the left first then work your way back towards the right hand needle, slipping them together after they are all knitted. On the other rows, just knit the knit stitches and purl the purl stitches. Youre going to see this quite a bit in cable patterns. Every other row - wrong side rows or every second row when youre knitting in the round - will instruct you to knit the knit stitches and purl the purl stitches. Or in other words work the stitches as you come to them. Just in case anyone has waded through mock cables and happens to be wondering how to tell the difference between a knit and a purl stitch by sight, here you go: When youre looking at a knit stitch, it will appear as though the yarn across the needle is wearing a scarf. When youre looking at a purl stitch, it will appear as if its got a noose around its neck. If you discover that you have crossed a cable the wrong way a few rows back, you can try this procedure. Remove the cabled stitches (not the surrounding purl stitches, only the stitches that are crossed while cabling) from the needles. This can be scary, but the alternative is ripping the entire work back those few rows. What do you have to lose? If youre new to this or are cabling with a slippery yarn (like cotton or silk) you might want to insert a safety line below the mis-crossed cable so that your yarn doesnt go slithering too far down. Pull the yarn out of these stitches, row by row, until the mis-crossed cable suddenly goes from looking like this: to this: As you can see, you are back to beyond the point when you mis-crossed the cable. Notice how the threads that youre pulling out of the stitches are coming from the surrounding stitches. Youre going to be working with the lowest thread first, then working your way up. Slip the stitches back onto the left hand needle and then slip the
See less »
Highlights:
How to fix mistakes in cable
Tags:
Buy itknitty.com
Added by 1 people