Flag Product

Linksys WPS54GU2 Wireless-G Print Server for USB 2.0

Add to my list

Send to friend

Compare prices

Shop for it: (added from 1 site)

Buy itamazon.com

See more products from this brand »

Added by 1 people

mtaylorwdpro added to Electronics

0 Hearts

Description:

After reading the mixed reviews for this, I still decided to try the Linksys Wireless Print Server. Although this is more expensive than the wired print server, I thought that it may be nice to locate my printers (one is USB and... See more » After reading the mixed reviews for this, I still decided to try the Linksys Wireless Print Server. Although this is more expensive than the wired print server, I thought that it may be nice to locate my printers (one is USB and the other is parallel/USB) and wireless router in different locations. Neither printer is multi-function. I first tried a "wired" Linksys print server, but was unable to connect (2) USB printers using a hub - plus the price of the print server and the hub was nearly the same as the wireless device. So far so good, but there are some things that I suggest you do when installing this device. These are based on personal experience, which has been a process of educated trial and error. An IT professional may do things differently, but if you were an IT professional, you probably wouldn't be reading these reviews. My network is almost entirely Linksys components (wireless router, wireless adapter, and print server), although I am using the network cards that were pre-installed with those computers that are hard wired to the router. First, disable your firewall. This will allow you to test the compatibility of the printers, the network, and the print sever without the extra component to worry about. Once everything is up and running, you can enable your firewall and tweak any networking restrictions at that time. Secondly, when configuring the router (which is the first step), you will need to have this "wired" to your router. This is part of the instructions, and should not come as a surprise. However, make sure you leave this "wired" until you have installed the print server drivers and software on all your networked computers. The install utility seems to have trouble finding the print server if you have disconnected the hard wire connection, even if the print server lights indicate it is already on the wireless LAN. Thirdly, if you are using MAC address filtering, temporarily disable this. One you get the print server set up and running, you can find its MAC address using the web utility or the BI-admin utility, and then restore the filtering after adding the print server. However, if you want to use the web based configuration utility (like you use with your router), please follow the instructions in the following paragraph. Fourth, once you have installed everything per the instructions, I recommend the following: give your print server a fixed IP address on your network (e.g. 192.168.1.171). My experience is this: If your router uses DHCP to assign IP addresses to your networked computers and servers, the print server does not always communicate back to the router, and your print server will sometimes "disappear" from your network after computers have been turned off and on. Something to do with the order the computers and servers are turned on. Setting this to a fixed address has cleared up those problems for me. Also, because the print server's address is fixed, you can access the web based configuration utility by typing in the same IP address each time. Fifthly, find the MAC address using the web based or BI-admin utility. Now, if you are using these, reinstate your MAC address filtering, adding your print server's address to the allowed list. Sixth, test and test again. Reboot your computers and unplug and re-plug your print server. Send documents to all your printers from all your computers - not just printer test pages. Print actual documents from a "Wordpad" or similar program. Seventh, enable your firewall, remembering to enable access to your print server at the fixed IP address used above. Eighth, test again just to make sure. If it doesn't work now, you know it's the network settings of your firewall. This has seemed to work for me. Comment | Was this review helpful to you? (Report this) See less »

Highlights:

9 used & new from $99.00

Tags:

computers

Comments (0)

Add a Comment:

Not a Kaboodler? Join Now, It's Free!

Email:

Screen Name:

Password:

Birthday:

Security Check
(Reload)

Enter Both Words

I have read and agree to the Terms of Service

Remember me on this computer.

Kaboodle will send you a newsletter and updates from your friends. You can unsubscribe at any time. Kaboodle does not sell or share your email address or personal information with anyone.

Cancel Already a Kaboodler? Sign in

Linksys WPS54GU2 Wireless-G Print Server for USB 2.0

Comments (0)

Add a Comment:

Thanks for Hearting!

Not a Kaboodler? Join Now, It's Free!

Sign in to Kaboodle