Flag Product

multi-colored custom yarn with kool-aid, part 1!

Add to my list

Send to friend

Compare prices

Shop for it: (added from 1 site)

Buy itleethal.coloredlight...

See more products from this brand »

Added by 2 people

kcc138 added to Create:...

pinkleo added to Kits & Supplies

3 Hearts

Description:

ok here i go, my first blog tutorial! it’s gonna be a two-parter, about dyeing yarn with kool-aid, just my personal methods. i do plan to devote a few pages of do stuff! issue #2 to kool-aid dyeing, but that won’t be released till... See more » ok here i go, my first blog tutorial! it’s gonna be a two-parter, about dyeing yarn with kool-aid, just my personal methods. i do plan to devote a few pages of do stuff! issue #2 to kool-aid dyeing, but that won’t be released till probably late fall (thanks to the upcoming move and all). i learned to dye yarn by reading a bunch of different online and book/zine tutorials, and kind of combining bits of each to form my own techniques, so i’d recommend the same to everyone else wanting to learn. the more knowledge and advice you have going into it, the better your results should be, right? so here are a few sites to get you started, then i’ll tell you about my methods… * knitty tutorial * thepiper.com tutorial * another tutorial with photos of yarn spun with dyed roving * craftster has many threads relating to kool-aid dyeing * a great color chart with each color shown on both white and grey yarn * google “kool-aid dye” to find tonnns more! * and, a tutorial on dyeing with food coloring to give you more color options in the last few months i’ve been experimenting quite a bit, learning from my (many) mistakes, trial and error… i started out dyeing over some brown yarn and green yarn i already had lying around, then bought a skein of off-white wool to play with colors. i divided that one skein into 3 hanks, one small, then a little bigger, and bigger, so i could start with the smallest and hope by the time i got to the biggest i would be able to get what i wanted. and it worked! and that final biggest hank was enough yarn to make into a hat! so, i’m gonna tell you how i got that color variegation, because it took me many tries to perfect my techniques. first things first - you’ll need: some natural fiber yarn (mine was 100% wool) wound into a hank and tied in a few spots (not too loose, not too tight) with contrasting yarn (i use acrylic so it won’t end up the same color), a big pot, a stove, a colander, a spoon, a cup to mix kool-aid in, kool-aid of course, and a sink. first, fill the pot about halfway with hot tap water, and submerge the yarn in it (use as much water as needed to cover the yarn), let it soak for about a half hour so the yarn absorbs the water. while it’s soaking, you can mix your kool-aid colors. use very little water (a couple inches) for each color. choose colors that will blend together nicely (no complimentary colors!) because even though you’ll try to keep them separate, they will blend in spots. you can dip a piece of white paper towel/napkin in to test the color, but you won’t know exactly how it’s gonna turn out until you see the final yarn (so if it’s important to get exactly the right shades, you’ll have to test-dye small yarn samples). after the yarn is soaked, pour most of the water out - hold the yarn in the pot with a spoon and drain all the excess so the remaining water is not quite covering the yarn, but close. this is the key to getting the variegated colors with minimal blending. the more water in the pot, the more the colors will float and travel and blend… now, start heating up your yarn pot. you want it to lightly simmer, but not boil! with too much agitation and/or temperature change, the yarn will felt and be ruined, so always keep an eye on the water to keep it hot, but not too hot. ok after turning on the heat, you can pour in your colors. slowly and carefully pour the little kool-aid batches in towards the edges of the pot, evenly spaced - when you pour at the edges, the colors will bleed in to the center (if you pour too close to the center, they will bleed together too much). now it should look something like this: just keep it at a simmer for about a half hour, until you see that the color is all in the yarn, not the water. the water might get cloudy (sometimes it does, sometimes it doesn’t), but you can tell when the color is gone. pour the water out through the colander, carefully dumping the yarn into it, and start rinsing with hot tap water, then warm (rinsing super hot yarn with cool water could felt the yarn!). when the yarn isn’t so hot, you can hold it to rinse See less »

Tags:

dye, dyeing, handdye, how-to, leethal, tutorial, wool, yarn

Flag Comments

Comments (1)

From the list : Kits & Supplies by pinkleo

Ooooooo....look at all the bright colors! Fabulous!

Add a Comment:

Not a Kaboodler? Join Now, It's Free!

Email:

Screen Name:

Password:

Birthday:

Security Check
(Reload)

Enter Both Words

I have read and agree to the Terms of Service

Remember me on this computer.

Kaboodle will send you a newsletter and updates from your friends. You can unsubscribe at any time. Kaboodle does not sell or share your email address or personal information with anyone.

Cancel Already a Kaboodler? Sign in

multi-colored custom yarn with kool-aid, part 1!

Comments (1)

Add a Comment:

Thanks for Hearting!

Not a Kaboodler? Join Now, It's Free!

Sign in to Kaboodle