See this at: en.wikipedia.org| Added on 10/24/07

Since the Stirling engine is a closed cycle, it contains a fixed mass of gas called the "working fluid", most commonly air, hydrogen or helium. In normal operation, the engine is sealed and no gas enters or leaves the engine. No valves are required,... See more

Since the Stirling engine is a closed cycle, it contains a fixed mass of gas called the "working fluid", most commonly air, hydrogen or helium. In normal operation, the engine is sealed and no gas enters or leaves the engine. No valves are required, unlike other types of piston engines. The Stirling engine, like most heat-engines, cycles through four main processes: cooling, compression, heating and expansion. This is accomplished by moving the gas back and forth between hot and cold heat exchangers. The hot heat exchanger is in thermal contact with an external heat source, e.g. a fuel burner, and the cold heat exchanger being in thermal contact with an external heat sink, e.g. air fins. A change in gas temperature will cause a corresponding change in gas pressure, while the motion of the piston causes the gas to be alternately expanded and compressed. The gas follows the behavior described by the gas laws which describe how a gas's pressure, temperature and volume are related. When... See less